전체상품목록 바로가기

본문 바로가기


 

product

    UV Post-Curing

  • D102H
  • R102
  • U102H

    Prototype

  • U201H
  • CureM 301

    Accessary

R102

CureM R102 is a special developed curing machine for polymerization of dental composite and resin applied in the field of models, bite splints, aligners, surgical guides, Crowns, denture cosmetic finishing etc.
Especially, CureM R102 performs curing and sterilization functions simultaneously from all sides and thus ensures its biocompatibility.

Specifications:
+ Light Source : UV LED
+ Input Voltage : 100~240V
+ Frequency : 50/50Hz
+ Output Voltage : 24V, 5.4A
+ Power Consumption : 75W
+ LED Min Radiant Flux : 1100mW
+ LED Max Radiant Flux : 1300mW
+ LED Operation Temp : -10~85℃
+ Sterilization UV Lamp : 5W(254nm)
+ Curing Chamber : 120ø, 95mm(H)
+ OUter Dimention : 248ø, 385mm(H)
+ Weight : 6kg

  CureM R102 is a high intensity UV LED post-curing machine.
It is illuminated from 3-Dimension with automatic turntable for
the optimal curing quality.
Circle Plate of High penetration & Reflectance on the upper
and bottom of the turntable, Circle plate of the High penetration
and reflectance ratio is installed for the optimum curing Quality.
It can cure upper/side/bottom of 3D objects more perfectly.

To increase a intensity of UV LED and reach more stronger LED energy to the 3D objects, it has attached narrow angle lens on the LED components.
It will be concentrated LED light on the objects and achieve the optimum curing quality.

The internal sterilization lamp can sterilize Escherichia coli, Staphylococcus Aureus, Pseudomonas aeruginosa at exposure time 180 seconds and 7cm working distance on exposed Surface.

During curing processing, by cooling Heatsink attached on UV LED continuously through this Air Flow hole, it can maintain the best UV LED temperature condition for the best curing quality.

  It can change LED brightness level(1~5 level) depending upon the object’s properties and certain purpose.
More simple User Interface
  - Simple selection for Curing and Sterilization
  - Easy to change Curing time
Safety function for UV LED overheat with cooling fan.
If UV LED module temperature is over than 50 degree, it will be stop all operation automatically with buzzer.

 - Additional function N₂Insert Tube(One touch fitting)
If you inject N₂through this hole,
it performs more smooth and strength for surface of 3D objects.